Skip to content

Products · Firefighting pumps

UL/FM Approved Fire Pump Sets

Internationally approved fire pump sets with electric, diesel and jockey pumps, supplied from top global manufacturers, installed to NFPA standards, then tested and commissioned by our team.

Red horizontal split case fire pump set on its base frame
Drivers
Electric · Diesel · Jockey
Approvals
UL Listed · FM Approved
Installation standard
NFPA 20
Our scope
Supply to commissioning
Fire pump set with split case pump, electric motor and base frame

The package

What a fire pump set includes

Each set is configured to the project’s rated flow and pressure. A typical package brings together:

  • Main fire pump: horizontal split case, end suction or vertical
  • Electric motor or diesel engine driver
  • Listed fire pump controller for the driver
  • Jockey pump and controller to hold system pressure
  • Common base frame, couplings and guards
  • Suction and discharge valves, gauges and relief valve
  • Test header or flow meter for performance testing

Driver options

Electric, diesel and jockey pumps

Most systems combine a main pump, a standby driver and a jockey pump. Choose a driver to compare.

Electric motor-driven fire pump

01 / 03

Electric motor-driven fire pump

The main duty pump on most systems where a reliable power supply is available. Started automatically by its listed controller when system pressure drops.

  • Listed electric fire pump controller
  • Automatic start on pressure drop
  • Simple, low-maintenance driver

Pump types

The right pump for the duty

  • Horizontal split case pump

    Horizontal split case

    High flows and long service life; the casing opens for maintenance without disturbing pipework.

  • End suction pump

    End suction

    A compact, economical choice for small and medium flows.

  • Not sure which configuration you need?

    Send us your design documents or duty point, and we will select and size the set with you.

    Ask our team

NFPA 20 performance

Performance you can verify

Listed fire pumps are tested to the NFPA 20 performance envelope. At commissioning we run the set against its curve and record the results.

  1. 1ChurnAt zero flow, pressure must not exceed 140% of rated pressure
  2. 2Rated point100% of rated flow at 100% of rated pressure
  3. 3OverloadAt 150% of rated flow, at least 65% of rated pressure
Fire pump curve: pressure falls from churn at zero flow, through 100% pressure at rated flow, to above 65% pressure at 150% flow.0%50%100%150%0%50%100%150%Flow (% of rated)Pressure (% of rated)140% max at churn65% min123
Illustrative curve. Each pump’s certified curve is supplied with the set.

Standards & approvals

Listed, approved and installed to code

The standards behind a UL/FM fire pump set, from the pump to its controller and installation.

  • NFPA 20

    Installation of stationary pumps for fire protection

  • UL 448

    Centrifugal stationary pumps for fire-protection service

  • FM Class 1311

    Approval standard for centrifugal fire pumps

  • UL 218 · FM 1321/1323

    Fire pump controllers, electric and diesel

FAQ

Common questions

What is the difference between UL/FM and non-UL/FM fire pump sets?

UL/FM sets use pumps, drivers and controllers that are UL Listed and FM Approved, as many projects, insurers and authorities require. Where a listed set is not required, we also offer locally assembled non-UL/FM fire pump sets with electric, diesel and jockey pumps.

Do I need an electric pump, a diesel pump, or both?

It depends on the reliability of the power supply and the project’s fire protection design. Many systems pair an electric main pump with a diesel standby pump, plus a jockey pump. We can review your design documents and advise.

What does a jockey pump do?

It keeps the fire protection network at standby pressure by making up small losses, so the main fire pump starts only when a sprinkler, hydrant or test valve actually opens.

Do you install and commission the set?

Yes. We install fire pumps following NFPA standards, then test and commission the set to confirm it meets the manufacturer’s recommendations and the design requirements, keeping it eligible for warranty service.

Request a quote

Complete water & electricity systems, from one partner.

Tell us about your project: pumps, fire pump sets, control or distribution panels, or service work. Our team will get back to you with a quotation.

Project details

We use your details only to reply to your request. Privacy policy