Our services
Laser Alignment Service
Optimise efficiency and reliability and reduce energy consumption and operating costs with our pump laser alignment service.

- Equipment
- Pump–motor sets
- Measured
- Offset & angularity
- Where we work
- On site
- You receive
- Before / after readings
Why alignment matters
Small misalignments, big losses
When the motor and pump shafts are not on one centreline, the coupling, bearings and seals absorb the difference with every revolution. Laser alignment measures that error precisely and brings both shafts back into line.
- Lower energy useLess power lost in the coupling and bearings, so more of the motor’s energy goes into moving water.
- Longer bearing & seal lifeReduced radial and axial loads on bearings and mechanical seals.
- Less vibration & noiseA smoother-running set that is kinder to pipework and foundations.
- Fewer unplanned stopsWear is prevented rather than repaired, keeping the station available.
Offset0.42 mm
Angularity0.35 mm/100
Out of tolerance
How we do it
Five steps to a straight line
A repeatable procedure, measured before and after, so you can see the result.
Step 1: Pre-alignment checks
Inspect the base, check for soft foot and pipe strain, and confirm the coupling and shafts are in good condition.
Step 2: Mount the laser heads
Measuring units are fixed to the motor and pump shafts on either side of the coupling.
Step 3: Measure
The shafts are rotated and the system reads offset and angularity in the vertical and horizontal planes.
Step 4: Correct
The motor is moved into position with precision shims and horizontal adjustments, live on the display.
Step 5: Verify & report
A final measurement confirms the result, and before and after readings are recorded for your files.
Where we use it
Any pump coupled to a motor
- End suction pumps
- Split case pumps
- Chilled water pumps
- Fire pump sets
- Booster and transfer pumps
- Motor-driven process pumps
In the field
Laser alignment on site
Our team aligning pump and motor sets. Select a photo to view it full size.
Energy savings
What is better efficiency worth to you?
Pumps run for thousands of hours a year. Enter your duty in our estimator for a quick, indicative figure.
Open the savings estimatorOur other services
One team across the life of your pumps
- 01Local AssemblingLocally assembled booster sets, non-UL/FM fire systems and control/distribution panels.
- 02Workshop & On Site RepairFull overhaul in our workshop, or fast repair at your site.
- 03Testing & CommissioningVerified installation that keeps supplied equipment eligible for warranty.
- 04Installation ServicePump installation to manufacturer standards and NFPA standards for fire pumps.
- 05Inspection ServicePeriodic inspection and testing that protect you from costly pump failures.
- 06Maintenance ServiceEfficient, reliable pumping-station maintenance across Saudi Arabia for industrial, commercial and utility operations.
Request a quote
Complete water & electricity systems, from one partner.
Tell us about your project: pumps, fire pump sets, control or distribution panels, or service work. Our team will get back to you with a quotation.

